Overview

The EasyPSoC4 is MikroElektronika's latest development board for 8, 20, 28 and 48-pin DIP-packaged PSoC (Programmable-System-On-a-Chip) mixed signal arrays by Cypress. The EasyPSoC4 includes a high-speed USB programmer plus many advanced built-in I/O features.

The EasyPSoC4 is supplied with a removable 48-pin CY8C27643 MCU card and provides everything you need to start developing for, experimenting with or learning about this microcontroller.

By including the programmer, PSoC MCU board and useful I/O devices on one board, the EasyPSoC4 will save you having to waste time trying to set up individual programmers, prototyping boards and I/O devices.

Features

• On-board high-speed USB 2.0 programmer.
• Sockets for 8, 20, 28 and 48-pin PSoCs (48-pin CY8C27643 included).
• 32 LEDs show status of the PSoC's I/O lines.
• 32 pushbutton switches to simulate digital inputs.
• Three analogue potentiometers for simulating analogue inputs.
• Connector for optional 16x2 character LCD.
• Connector for optional 128x64 graphic LCD.
• Controller and connector for optional touchscreen overlay.
• Socket for optional Dallas/Maxim DS1820 1-wire temperature sensor.
• RS-232 port with female DB9 connector.
• RS-485 interface.
• CAN interface.
• MMC/SD card slot.
• PCF8583 real-time clock with battery backup.
• All I/O lines are available for easy off-board expansion.
• Pull-up or pull-down port defining.
• Power supply can be by USB or optional AC/DC power adapter.
• Large range of optional interface boards available.

Please note that character and graphic LCDs, touchscreen overlay, DS1820 temperature sensor and RS-232 serial cable are not included with the EasyPSoC4 and should be ordered separately if required - see accessories for details and to order.